The reasons for the lack of engine power quickly check!

Not sure which one?
Check out our list of 30 different reasons why,
Not afraid you can't find it
1 throttle cable installation, improper adjustment, this situation only need to adjust the throttle cable can be eliminated.
2 When the accelerator pedal is pressed to the end, the acceleration handle on the fuel injection pump is also supported by the limit bolt at the same time, but the engine speed is still not up to the rated speed, and the limit bolt is adjusted appropriately.
3) The oil tank filter screen is blocked, the crude fuel filter is blocked, the fine fuel filter is blocked, the oil circuit is not smooth.
4 The oil pump leaks inside, the oil supply is not smooth.
5 Oil quality is poor, water and impurities.
6 The intake pipe is blocked, bent, and the air filter is dirty, resulting in large intake resistance and poor engine performance.
7 Supercharger damage, supercharger booster effect is poor, supercharger bypass cutting failure, supercharger can not reach the rated speed resulting in bad supercharger effect, the engine is weak.
8 The injection pump injection timing is not correct, will cause engine power poor.
9 Lubricated pump plunger pair wear, stuck; Fuel injection pump discharge felling damage; Fuel injection pump governor stuck, wear.
10 The diaphragm of the smoke limiter is damaged.
11 The injector atomizes poorly and the couple is stuck.
12 exhaust brake adjustment cut back is not good, blocking the exhaust channel, exhaust resistance caused by the engine weak.
13 Exhaust pipe, muffler blocked, exhaust resistance caused by the engine weak.
14 The injector is faulty. The needle valve of the injector is stuck and cannot operate due to water and impurities in the diesel oil. The injector does not spray or atomize, but the EcU may not report an error. The EcU will report an error when the injector harness is worn out due to vibration or when the cylinder head is lined with iron.